IDEAL EXPERT MIG 320 COMPACT SYNERGIC welding machine (semi-automatic)
EXPERT MIG 320 COMPACT SYNERGIC is a synergic inverter-type semi-automatic welding machine designed for professional and industrial use. It provides MIG/MAG, MMA and TIG Lift welding, as well as MIG brazing of galvanized sheets.
The machine is suitable for welding stainless steel, carbon steel, low-alloy steel and aluminum. Welding can be performed with inert, active or mixed shielding gas.
Manual and synergic control
Depending on the work to be performed and the user’s experience, you can choose one of two control modes:
- MAN — manual adjustment of welding parameters;
- SYN — synergic adjustment of welding parameters.
Synergic control automatically coordinates interrelated welding parameters, making setup easier and helping to achieve a stable welding result.
MIG/MAG torch control modes
In MIG/MAG welding, you can choose the most suitable operating mode for the welding torch trigger:
- SPOT — for spot welding;
- 2T — welding without trigger latching;
- 4T — trigger latching for welding long seams;
- S2T — mode for welding long seams with adjustable start and end current.
Precise adjustment of welding parameters
EXPERT MIG 320 provides synergic control of welding parameters and precise adjustment of welding arc length.
The LED display shows the most important operating parameters:
- welding current;
- welding voltage;
- wire feed speed;
- welding arc length correction.
Additional inductance adjustment allows you to tailor arc dynamics and helps reduce spatter formation during welding.
Professional four-roll wire feed mechanism
The professional four-roll wire feed mechanism ensures stable and even feeding of the welding wire. This is especially important during prolonged work, when using a longer welding torch, or when working with wires of different materials.
The machine supports D200 and D300 spools weighing up to 15 kg.
Welding parameter memory
The welding parameter saving function allows you to quickly restore previously used settings. This makes it easier to work with different materials, wires and shielding gases, because after changing equipment or material the parameters do not need to be set again from scratch each time.
SMART cooling system
The machine’s fans are equipped with a SMART control system and switch on only when cooling is required. This helps reduce energy consumption, noise level and dust accumulation inside the machine.
Built-in overload protection improves the machine’s operational safety and reliability.
Mobile chassis and tool box
EXPERT MIG 320 is equipped with a specially designed mobile chassis that makes it easier to transport the machine in the workshop and at the job site. An additional tool box provides a convenient place to store welding accessories and spare parts.
The machine operates from a three-phase 3 × 400 V power supply and is delivered without a power plug.
Package contents
The set includes:
- EXPERT MIG 320 COMPACT SYNERGIC welding machine;
- MB 36 welding torch, 4 m;
- ground cable, 3 m;
- mobile chassis;
- tool box;
- four V-type feed rollers for 1.0–1.2 mm steel wire.
Technical specification
| Parameter | Value |
|---|---|
| Welding methods | MIG/MAG, MMA, TIG Lift, MIG brazing |
| Control modes | MAN and SYN |
| Wire feed mechanism | Four-roll |
| Mains protection | C16 A |
| Rated supply voltage | 400 V, 50 Hz, 3 phases |
| Power | 13.5 kW |
| Open-circuit voltage | 86 V |
| Maximum welding current | 300 A |
| Current at 100% duty cycle | 232 A MIG/MAG; 190 A MMA; 232 A TIG |
| Current at 60% duty cycle | 300 A MIG/MAG; 245 A MMA; 300 A TIG |
| MIG/MAG current adjustment range | 30–300 A |
| MMA/TIG current adjustment range | 10–300 A |
| Steel wire diameter | 0.8–1.2 mm |
| Stainless steel wire diameter | 0.8–1.2 mm |
| Aluminum wire diameter | 1.0–1.2 mm |
| MIG brazing wire diameter | 1.0–1.2 mm |
| Flux-cored wire diameter | 0.9–1.2 mm |
| Welding electrode diameter | 1.6–5.0 mm |
| Wire spool size | D200 (5 kg) or D300 (15 kg) |
| Protection class | IP21S |
| Weight | 65 kg |
| Machine dimensions (L × W × H) | 1200 × 500 × 970 mm |
| Package dimensions (L × W × H) | 860 × 360 × 1000 mm |
