IDEAL TECNO MIG 210 PULSE LCD Black Series 4x4 welding machine (semi-automatic)

TECNO MIG 210 PULSE LCD Black Series 4x4 is a synergic inverter-type semi-automatic welding machine designed for professional and workshop use. It supports MIG/MAG, MMA and TIG Lift welding, as well as MIG brazing of galvanized sheets.

The machine offers 15 synergic MIG/MAG welding modes, including PULSE and DOUBLE PULSE. It is suitable for welding stainless steel, carbon steel, low-alloy steel and aluminium, as well as MIG brazing of galvanized sheets.

Welding can be performed with inert, active or mixed shielding gas. Using self-shielded wire and reversed polarity, it is also possible to work without shielding gas.

PULSE and DOUBLE PULSE modes

Pulsed welding helps precisely control heat input into the material being welded, reduces spatter and allows a high-quality weld in various welding positions.

In MIG/MAG pulse modes it is possible to adjust:

• base and main arc length;
• arc length for start and end current;
• pulse base current;
• pulse duration;
• current and frequency control mode.

Pulse adjustment is also available in TIG Lift mode.

MIG/MAG torch control modes

Depending on the work to be performed, it is possible to choose the most suitable torch trigger operating mode:

• SPOT — for spot welding;
• 2T — welding without trigger latching;
• 4T — trigger latching for welding long seams;
• S2T and S4T — special two-stroke and four-stroke modes.

LCD display and precise parameter adjustment

The clear and easy-to-use LCD display ensures precise setting of welding parameters both in manual MIG MAN and in synergic MIG SYN mode.

Adjustable parameters:

• gas pre-flow time;
• gas post-flow time;
• wire feed;
• wire burn-back time;
• voltage correction;
• spot welding duration;
• inductance;
• current upslope and downslope.

MMA mode functions

In MMA welding mode, several functions are available for more stable and convenient operation:

• HOT START — temporarily increases welding current at arc ignition, making electrode striking easier;
• ARC FORCE — stabilizes the welding arc and helps reduce spatter;
• ANTI STICK — automatically switches off welding voltage if the electrode sticks to the material, making it easier to detach;
• VRD (Voltage Reduction Device) — reduces open-circuit voltage at the electrode to a safer level and increases protection against electric shock in a wet working environment.

JOB settings memory

The JOB function allows you to save and later quickly restore welding parameters. This makes it easier to work with different materials, wires and shielding gases, because after changing equipment or material the settings do not need to be re-entered each time.

Cooling and protection

The fan cooling system helps maintain stable operation of the machine and increases its efficiency. Built-in overload protection improves the machine's reliability and service life.

The machine operates from a single-phase 230 V mains supply and is equipped with a power plug.

Package contents

The set includes:

• TECNO MIG 210 PULSE LCD welding machine;
• professional MIG 24 welding torch, 3 m;
• electrode cable, 2 m;
• ground cable, 2 m;
• carbon-teflon wire liner with tip;
• steel spiral wire liner;
• feed rollers for 0.8–1.0 mm steel wire;
• feed rollers for 1.0–1.2 mm aluminium wire.

Technical specification