Magmaweld M11

Welding electrodes M11 are suitable for welding iron products and light steel structures, welding of agricultural machinery, boilers and other products. Suitable for welding in all welding positions except vertical down (PG). Especially suitable for welding lower (PA; PB) joints. Very smooth weld, easy arc ignition and re-ignition, stable arc with even metal transfer from the electrode to the base material. Equally good welding properties when welding with direct current and alternating current. After welding, the fluxes separate from the seam themselves.

AWS A5.1: E6013

EN ISO 2560-A: E 42 0 RR 12

Chemical composition of the weld metal (Characteristic values%):

C Si Mn

0.06 0.40 0.55

Heat treatment: No treatment

Yield strength N / mm2: 500

Strength limit N / mm2: 560

Relative elongation A5 (%): 28

Strength ISO - V (J) 0 ° C: 55

S185 - S355J0

P235GH, P265GH

P295GH

P235TR2 - P355T2

P235G1TH, P255G1TH

L210 - L360NB

S255N - S355N

GE 200, GE 240, GE 260 GS 38, GS 45, GS 52

Drying is usually not required. If necessary, dry for 1 hour at 110 ° C.

Store in a dry place (relative humidity <50%, air temperature> 20 ° C) on wooden pallets.

 Current polarity: DC - or alternating current.