SPARTUS EasyTIG 203P DC inverter type argon welding machine

EASY TO USE TIG DC WITH PULSE

SPARTUS® Easy TIG 203P DC is lightweight and easy to use TIG DC with pulse. Allows welding TIG AC/DC and modes in 10 – 200A range. It is powered with single-phase 230V source power.

The device is equipped with a clear function panel, the operation of which has been reduced to a minimum – a multifunctional knob and two buttons.

Despite its simple structure EasyTIG 203P DC is equipped in advanced functions supporting the welding process in TIG method. A diagram of TIG parameters on the panel allows for full adjustment:

– gas flow time before and after welding

– up slope and down slope time.

In addition, the built-in pulse welding function (frequency 0.5 – 200Hz) enables adjustment: base amps, pulse amps, pulse frequency. Thanks to these parameters the machine is perfect for joining even very thin sheets.

Depending on the welder’s preferences EasyTIG 203P DC can work in 2T or 4T mode.

MMA welding mode (to 200A) is assisted by functions: Arc Force and Hot Start.

Thanks to its lightness and handy construction EasyTIG 203P DC is perfect for outdoor works.

Examples of use: portable repair, workshop, maintenance, constructions.

Technical details

Input ~1× 230V ± 10% 50 / 60 Hz

TIG welding current 10 - 200A

TIG duty cycle 60%

Gas pre flow 0 - 2s

Gas post flow 0 - 10s

Up slope 0 - 10s

Down slope 0 - 10s

Pulse Amps 5 - 200A

Pulse Width 5 - 95%

Pulse frequency 0.5 - 200Hz

2T/4T Control yes

Arc ignition HF

MMA welding current 10 - 200A

Arc Force yes

Hot Start yes

No-load voltage 69V

Current consumpiton TIG 32A / MMA 47A

Power factor (cosφ) 0.6

Efficiency η 85%

Insulation class H

Protection class IP21S

Weight 7.9kg

Dimensions 420 x 135 x 240mm