ALFAIN SVAROG 105 PLASMA SYNERGY plasma cutting machine

SVAROG 105 PLASMA SYNERGY plasma cutting machine

SVAROG 105 PLASMA SYNERGY machine is designed for cutting metals based on modern material division technology through a thin plasma gas beam.

This technology has several advantages compared to other methods:

• High cutting speed;
• High-quality cut with a minimum area of the modified material structure;
• Smaller thermal deformation of the cut-out material;
• Ability to cut carbon and high-alloy steels;
• You can cut stainless steel and non-ferrous metals;
• Method does not require any special gases;
• Less selfcost;
• Heavy industry

This inverter Pegas Plasma cutting machine is possible productively to cut carbon steel up to 32 mm material thickness, to cut up to 50 mm in a very good quality (but slower) and simply to separate material of 60 mm thickness.

TECHNICAL DATA

Mains voltage: 3x 400 V
Mains frequency: 50/60 Hz
Open-circuit voltage: 330 V
Mains protection: 40 A
Max. effective current .............: 36.7 A
Cutting current range................: 20-105 A
Cutting current (DC=100%).....: 105 A
Cutting current (DC=60%).......: 105 A
Cutting current (DC=x%), A....: 105@100%
Max. cutting thinkness - Carbon steel........: 50 mm
Quality cutting thickenss - Carbon steel...: 45 mm
Quality cutting thickenss - Stainless steel: 40 mm
Quality cutting thickenss - Aluminium.........: 30 mm
Quality cutting thickenss - Copper.................: 25 mm
Working pressure:: 5-5.5 bar
Max. Input pressure: 8.5 bar
Air consumption: 240 l/min
Arc ignition: pneu-mechanic
Curent regulation: continuous
Protection degree: IP23S
Standards: EN 60974-1, EN 60974-10 cl.A
Dimensions: 377 x 802 x 621 cm
Weight: 46.7 kg

!Complete with torch SVH-105, 6.7m

* Before ordering, check availability.

---

RELATED ACCESSORIES:
🞂 Torch SVH-125 hand 75°, 6.7m
🞂 Cart SVAROG PLASMA
🞂 Air Filter AT 1000
🞂 Air Filter cartridge AT 1000
🞂 Adapter for PEGAS PLASMA

---

Booklet
User Manual