Oerlikon CITOCUT 100 plasma cutting machine

High efficiency plasma cutting Oerlikon!

Durable and reliable plasma cutting machine.

The CITOCUT 100 plasma cutting machine is designed for use in harsh environments using tunnel technology printed circuit board to separate large and sensitive parts from cooling air flow contamination.

Advanced mains voltage tolerances and a durable metal housing with large rubber guards in the corners allow these devices to be used both on site, from a generator and in a workshop.

The concept of plasma cutting is based on three elements:

S - innovative and patented impact system protects the electrode tip and prolongs its service life.

P-circular additions with improved radial airflow and innovative electrode / tip design make the plasma arc concentrated. L - Electrode internal cooling and torch head and electrode / tip design provide significantly longer service life.

Primary voltage: (50-60 Hz) 400V / 3 f.

Current range (A): 20-100

Cutting capacity (mm): 40

Duty cycle at 40 ° C: 100 A at 40% 60 A at 100%

Flow rate (l / min ± 20% at 5,0 bar): 280

Inlet pressure (bars): 7.0

Weight (kg): 38

Dimensions High. x Plat. x Deep. (mm): 465 x 290 x 670

Oerlikon CITOCUT 100 is recommended for low carbon steel up to 40 mm thick (cutting / splitting 45 mm)

* The cutting torch will not be included

Manufacturer: Oerlikon

Manufacturer Article: W000403597

Additional accessories available for ordering:

LC105 torch - hand - 7.5 m: PTH-101A-CX-7M5A

LC105 torch - hand - 15 m: PTH-101A-CX-15MA

LC105M burner - equipment - 7.5 m: PTM-101A-CX-7M5A

LC105M burner - equipment - 15 m: PTM-101A-CX-15MA

Consumables box: LC105 W03X0893-115

Circle set: W0300699A

CITOCUT 100 remote control: K12049-1