EWM Pico 160 MMA welding machine

For all the requirements of the MMA welding process, the EWM Pico 160 welding machine is perfectly equipped for complex and responsible welding jobs!

Automatic ignition for safe and gentle ignition prevents the electrode from sticking to the workpiece. Stable arc with all types of electrodes, no arc break. Thanks to the tolerance of -40% to +15% / 50/60 Hz, the welder will not feel the fluctuations of the mains.

Arc strength and hot start can be set, your advantage is unlimited operation even with long mains cables thanks to the large mains voltage tolerances. Rugged design suitable for construction site use.

Shockproof body, portable, shoulder strap

Energy saving thanks to high efficiency and standby function Very light - housing made of aluminum and impact-resistant plastic IP23 protected against water spray 3.5 m mains cable with 16 A earthed plug.

Overvoltage protection: accidentally connected to 400V mains voltage, the device will not be damaged.

Manufacturer: EWM GmbH

Size: 370x129x236 mm

Weight: 4.9 kg

Mains voltage: 230 V (-40 % to +15 %) / 50/60 Hz

No load voltage: 105V

Duty cycle at 100% 40° C: 100 A

Duty cycle at 35% 40° C: 150 A

Duty cycle at 60% 40° C: 120 A

Welding current range: 10-150 A

Fuses: 1 x 20 A

Continuous primary current (100%): 19.6 A

Open circuit voltage (Ur): VRD AUS: 33 V

max. Added load (S1): 7.3 kVA

Generator rating (Rec.): MMA 9.9 kVA TIG 6.6 kVA

Cos φ / efficiency: 0.99 / 83 %

Protection class / Overvoltage category: Ⅰ / Ⅲ

Pollution level: 3

Insulation class / protection classification: H / IP 23

Residual current circuit breaker: Type B (recommended)

Noise level [3]: <70 dB(A)

Ambient temperature: -25 °C to +40 °C

Machine cooling / burner cooling

Network connection cable: H07RN-F3G2.5

Power cable cross-section: 16 mm2

Test mark: CE; S; EAC; UKCA

Standards used: See declaration of conformity (device documentation)

The kit will include: ground cable and electrode holder.