EWM Pico 160 cel pulse MMA welding machine with pulse

€980.00

Add to cart

For all the requirements of the MMA welding process, the EWM Pico 160 cel pulse welding machine is perfectly equipped for complex and responsible welding jobs! The welding machine has a pulse function in electrode mode.

Automatic ignition for safe and gentle ignition prevents the electrode from sticking to the workpiece. Stable arc with all types of electrodes, no arc break. Thanks to the tolerance of -40% to +15% / 50/60 Hz, the welder will not feel the fluctuations of the mains.

Welding procedures and functions:

MMA with pulse and LiftTIG welding - tungsten electrode ignition with touch

Normal mode of MMA welding

TIG lift arc welding

Cel welding mode with cellulose coated electrodes

Adjustable arc strength, hot start, anti-sticking of the electrode during welding

Arc force and hot start can be set

Your benefits:

Cellulose electrodes: 100% safe for vertical downward welding

Unrestricted generator operation even with long mains cables due to large mains voltage tolerances

Welding of coated electrodes up to 4 mm

Impact-resistant housing suitable for use on the construction site

Connection option for remote control

Portable, shoulder strap

Energy saving thanks to high efficiency and standby function

Very light – the body is made of aluminum and impact-resistant plastic

IP23 protected against water spray on the body of the welding machine

Available with open circuit voltage reduction, VRD (conforms to AS 1674.2-2003; IEC/DIN EN 60974-1 and ГОСТ 12.2 007.8)

3.5 m mains cable with 16 A grounded plug.

Overvoltage protection: accidentally connected to 400V mains voltage, the device will not be damaged.

The set includes:

EH 16 mm² 170 A/60% 4 m fully assembled electrode holder with cable 16 mm² - 95 mm²

WK16mm² Ø 13 mm 170A/60% 4m ground wire with clamp 16 mm² - 50 mm²

In addition to the equipment, you can purchase a remote control panel for electrode welding:

Remote_control_EWM_099-008113-EW560.pdf

Remote control RG13 RS-453 Infinitely adjustable welding current (from 0% to 100%) depending on the main current previously selected in the welding machine. With pre-installed 5 m connecting cable Setting the operating point directly at the welding point.

Technical information

Manufacturer: EWM GmbH

Size: 370x129x236 mm

Weight: 4.9 kg

Mains voltage: 230 V (-40 % to +15 %) / 50/60 Hz

No-load voltage: 94V

Duty cycle at 100% 40° C: 110 A

Duty cycle at 35% 40° C: 150 A

Duty cycle at 60% 40° C: 120 A

Welding current range: 10-150 A

Fuses: 1 x 20 A

Continuous primary current (100%): 1 x 20 A

Open circuit voltage (Ur): VRD AUS: 33 V

max. Added load (S1): 7.3 kVA

Generator rating (Rec.): MMA 9.9 kVA TIG 6.6 kVA

Cos φ / efficiency: 0.99 / 83 %

Protection class / Overvoltage category: Ⅰ / Ⅲ

Pollution level: 3

Insulation class / protection classification: H / IP 23

Residual current circuit breaker: Type B (recommended)

Noise level [3]: <70 dB(A)

Ambient temperature: -25 °C to +40 °C

Machine cooling / burner cooling

Network connection cable: H07RN-F3G2.5

Power cable cross-section: 16 mm2

EMC class: A

Test mark: CE; S; EAC; UKCA

Standards used: See declaration of conformity (device documentation)

The kit will include: ground cable and electrode holder.

Manufacturer code:

090-002129-00502 + Equipment

Info-EWM-Pico-160-cel-puls.pdf

Manual-EWM-Pico-160-cel-puls-099-002129-EW501.pdf

Quick_Start_Guide_Pico_160_cel_puls_099-QG2129-EW560.pdf

Welcome!
Industar e-shop
All prices include VAT *

Cart

Welcome!Industar e-shopAll prices include VAT *

EWM Pico 160 cel pulse MMA welding machine with pulse

Welcome!
Industar e-shop
All prices include VAT *