- E-shop
- Welding machines and equipment
- MIG/MAG welding machines
- Welding machine ALFAIN ATA 400 GENERATOR AXE for MIG/MAG Water cooling
Welding machine ALFAIN ATA 400 GENERATOR AXE for MIG/MAG Water cooling
Welding machine ATA 400 GENERATOR AXE for MIG/MAG
code E.042
Separate feeding welding machine for MIG/MAG.
- Copper transformer;
- Excellent welding characteristics in mixed gas and CO2;
- 2 x10 voltage steps;
- For max. 18 kg spools;
- Standard is 4 rolls wire feeder (D=40mm);
- Torch EURO connector;
- Gas pre-heating;
- Welds of different metals and alloys (such as carbon steel and alloy steel, aluminum, etc.);
- Electronic regulations of the choke;
- Settable PreGas, PostGas, Burn Back;
- *Water cooled;
- *Built in cooling unit;
- *Ecological cooling mode.
TECHNICAL DATA
Mains Voltage: 3x 400 V
Mains frequency: 50 Hz
Max. no load voltage: 20.2 - 59.8 V
Main fuse: 32 A
Welding current range [MIG-MAG]..............: 55 - 420 A
Max. effective current [MIG-MAG]................: 15.8 A
Welding current [MIG-MAG] (DC=3x100%): 260 A
Welding current [MIG-MAG] (DC=60%)...: 300 A
Welding current [MIG-MAG] (DC=x%)......: 420@30%
Voltage steps: 3x10
Protection degree: IP23S
Standards: EN 60974-1
Dimensions: 572 x 875 x 1340 mm
Weight: 137 kg
------------------------------------
Wire speed m/min: 1.0 - 25.0
Spool diameter .......: 300 mm
Spool weight .............: 18 kg
------------------------------------
Cooling power (Q=1l/min): 0.74 kW
Total liquid content : 3.5 l
Max. pressure ............: 3.5 bar
Max. flow ......................: 8 l/min
* Before ordering, check availability.
Welcome!
Industar e-shop
All prices include VAT *
Cart
Cart is empty.