TORROS MIG 200 DoublePulse LCD (4 feed rollers) welding machine machine (semi-automatic)

Semi-automatic welding inverter TORROS MIG-200 DoublePulse (M2009)

The machine is light in weight and size, as well as low energy consumption.

The welding machine is designed with the latest system IGBT transistors, which ensure low weight of the device, reliability, as well as single arc ignition, stable arc combustion, which has a positive effect on welding and its strength.

Pulse and double pulse modes allow high-quality welding of aluminum and its alloys in argon, as well as in the welding alloy zone of stainless and low-alloy steels with minimal heat input to the welding part, allowing welding of thin parts without the risk of burns.

Adjusting the frequency and pulse fill factor helps to achieve the desired quality through welding and welds, as well as helps the welder control the welding bath to achieve excellent weld geometry.

Pulse mode is a state-of-the-art technology that facilitates the welding of aluminum and other non-ferrous metals. In this welding method, the maximum current pulse is placed on the main current. The main current cleans the welding area well, maintains the required temperature in the welding bath and stabilizes the arc combustion. The maximum current ensures smooth and deep welding of the metal thanks to the pulse function.

4Т mode allows you to weld long seams without holding the torch button. The welding machine has a digital display to conveniently control the welding current and voltage. For easier and faster loading of seam programs, press the welding torch button for 5 seconds.

Forced ventilation protects the equipment from overheating. In case of insufficient cooling, thermal protection is activated, which protects the unit from overheating.

In welding mode, the MMA can activate the open circuit voltage reduction function (VRD 24V). The housing is made of metal with plastic front and rear panels and tightly protects electronic components from mechanical damage.

The device is equipped with a handle for easy carrying.

The semi-automatic machine is manufactured in accordance with European electromagnetic compatibility standards.

Welding machine TORROS MIG 200 DoublePulse LCD is equipped with a ground terminal, welding cable with holder and welding torch MIG / MAG, EURO connection, which allows the use of similar torches from other manufacturers. TIG burner not included and ordered separately.

Supply voltage, 50/60 Hz 220 15%

Maximum power consumption, A MIG - 35.7 / TIG - 26.8 / MMA - 41.7

Effective power consumption, A MIG - 19.6 / TIG - 14.7 / MMA - 22.8

Maximum energy consumption, kW MIG - 7.7 / TIG - 5.8 / MMA - 9

Efficient energy consumption, kW MIG - 3.4 / TIG - 2.5 / MMA - 4.3

Welding current regulation limits, A:

40A / 16V - 200A / 24V (MIG)

10 A / 10.4 V - 200 A / 18 V (TIG)

30A / 21.2V - 200A / 28V (MMA)

Idle voltage, V 65

Wire feed rate control limits, m / min 2 15

Delivery mechanism type 4R

Inductance correction limits,% -50 +50

Single pulse frequency control limits,% -30 +30

Single pulse maximum fill factor correction limits,% -30 +30

Double pulse frequency control limits, Hz 0.1 9.9

Double pulse peak fill factor correction limits,% 10 90

Double pulse main current control limits, m / min 1.5 12

Double pulse maximum current control limits, m / min 1.5 10.8

Gas time at end of welding (PostGas), s 1

Welding wire diameters, mm:

0.8 1.0 low alloy stainless steel

1.0 1.2 aluminum, copper

Electrode diameter, mm: 1.6 4.0

Load duration at maximum welding current,% 30

Efficiency,% 80

Network utilization rate 0.73

Protection class IP21S

Insulation class F.

Weight, kg 15.6

Overall dimensions, mm (length * width * height) 460 * 220 * 375