SPARTUS EasyMIG 315 LCD (4roll) welding machine (semi-automatic)

SYNERGIC 4-ROLL MIG

SPARTUS® EasyMIG 315 are high-end semi-automatic welding machine made of inverter technology using IGBTs, which allow welding with a fusible electrode in an inert and active gas shield (MIG/MAG), welding with coated electrode (MMA) and TiG Lift welding with ignition arc by rubbing.

In addition, the device allow welding with self-shielding wire without gas, thanks to the possibility of changing the welding polarity.

Maximum welding current for MIG/MAG/TIG methods is 300A for MMA welding method is: 250A.

It is powered from a three-phase 400V power source. The device are equipped with synergistic programs for MIG / MAG welding with steel wires in the diameter range 0.8 / 1.0 / 1.2mm. In addition, welders have the ability to manually adjust the set parameters.

Modern technological solutions made it possible to equip the device with a number of functions supporting the welding process:

2T / 4T – selection of one of two operating modes (MIG/MAG),

Inductance – precise arc dynamics adjustment Wave Control ensures full control over the welding arc: it allows to reduce the amount of welding splashes and controls the width and depth of fusion,

Burn Back – precise adjustment of welding wire burning speed allows limit a risk of sticking the welding wire to the contact tip,

Slow Feed – so called gentle start-up of the wire feeder, recommended especially during welding with high amperage and high speed of wire feed. Smooth start of wire feed eliminates the risk of welding defects at the beginning of the weld,

Hot Start – for easier electrode ignition (MMA),

Arc Force – for easier welding in forced positions (MMA),

Spool Gun – lightweight and durable welding gun with built-in wire feeder designed for MIG/ MAG welding,

VRD – lower no-load voltage (MMA).

High class four-roll wire feeder, ensures stable feeding of steel, stainless steel and aluminum welding wire. Stable output parameters guarantee appropriate weld quality.

Technical details

Input ~3× 400V ± 10% 50 / 60 Hz

MIG welding current 50 - 300A

MIG duty cycle 60%

Output working voltage 16.5 – 29V

Wire feeder built-in, 4-roll gear

Welding wire spool ≤ 15kg / ∅200/300mm

Wire diameter Stal 0.8 / 1.0 / 1.2mm, Alu 1.0 / 1.2mm

Synergy yes

2T/4T Control yes

Additional MIG functions Burn Back, inductance, synergistic program, manual adjustment of parameters, spool gun, Slow Feed, change polarity

TIG Lift yes

TIG welding current 10 - 300A

MMA welding current 10 - 250A

Arc Force yes

Hot Start yes

VRD yes

Current consumpiton MIG 17 / TIG 14 / MMA 13A

Power factor (cosφ) 0.93

Efficiency η 85%

Insulation class H

Protection class IP21S

Weight 22kg

Dimensions 570 x 265 x 460mm

Package equiped:

• EasyMIG 315

• MIG gun SPARTUS® SPE 360 3m

• 2 x wire guide roller 1.0-1.2V fi30

• electrode holder

• work Clamp

• gas hose

• user’s manual