Sherman MIG 450M welding machine (semi-automatic)

The MIG 450M is a compact inverter welder (with built-in wire feeder) built into IGBT technology for professional manual welding of steels and non-ferrous metals with coated electrode (MMA method) and MIG / MAG method with full and self-protective powder wire reverse polarity using MIG welding gun / MAG cooled with liquid up to 500A (standard).

The device is used indoors or on a roof that is not directly exposed to the atmosphere.

The MIG 450M welder is powered by a 3x400V three-phase network and works with D200 wire spools (5 kg) and

D300 (15 kg). The device is equipped with an integrated radiator and MIG / MAG welding gun TW-501, cooled to a length of 5 m. The radiator is equipped with an extensive automation system that protects the handle from damage if there is a lack of fluid flow in its circuit.

Spool guns (SG) (optional) The MIG / MAG allows you to connect a second SG-type handle in parallel with a mini wire feeder and a D100 steel or colored wire spool, so you can weld with two different wires without changing the welding machine.

The device is equipped with an arc inductance control system that allows you to control the remelting of welds and the 2T / 4T operating mode.

Manufacturer: SHERMAN

Supply voltage: 3x400V 50Hz

Welding methods: MIG, MMA

Maximum power consumption: 24.7kVA

Rated welding current / duty cycle: 450A / 60%

MIG welding current adjustment range: 50 - 450A

MMA welding current regulation range: 60 - 450A

Wire feed speed adjustment range: 3 - 24m / min

Wire coil diameter: 200mm, 300mm

Maximum power consumption: 32A (MIG), 31A (MMA)

Weight: 89kg

Dimensions: 950 x 460 x 1000

Coolant flow: 8.0 l / min

Coolant pressure: 0.3 MPa

Tank capacity: 6 l

Functions: 2T / 4T, inductance control, 4-roll feeder, coil option, integrated cooler