IDEAL Tecno MIG 337 SYNERGY PULSE LCD welding machine (semi-automatic) (Welldo)

TECNOMIG 337 PULSE SYNERGIC LCD is an inverter synergic semi-automatic welding machine designed for arc welding using the MIG/MAG, FLUX, MMA and TIG LIFT methods. The device has been designed for professional use.

The device has six synergistic welding modes: MIG STEEL CO 2 100%, MIG STEEL CO 2 25%, MIG ALU ARGON 100%, MIG CUSI ARGON 100%, MIG STAINLESS STEEL ARGON 98% + CO 2 2%, SELF-SHIELDING MIG.

TECNOMIG 337 PULSE SYNERGIC LCD is used for brazing galvanized sheets, welding stainless steel, carbon and low-alloy steel and aluminum. Welding is performed in a shielding gas of inert, active or mixed gas, and in reverse polarity without gas.

Thanks to the use of MIG pulsation, the amount of heat introduced into the welded element is increased. It is possible to obtain a better weld, regardless of the welding position and reduce the amount of spatter.

Both in the MIG and MIG PULS methods, we can choose the function of the button in the handle between 2-stroke and 4-stroke operation (button lock for long welds),

The clear and easy-to-use 7-inch LCD display allows for precise adjustment of welding parameters such as:

inductance regulation

welding voltage adjustment

wire feed adjustment

gas adjustment after

Pulse width adjustment in double pulse

Pulsation frequency adjustment in double pulse

HOT START : hot start control (manual) - facilitates electrode ignition by providing a higher welding current each time the arc is struck.

ANTI STICK : short circuit protection - automatically switches off the welding voltage if the electrode sticks to the welded material, which makes it easier to tear off and prevents accidental formation of a welding arc

VRD (Voltage Reduction Device) function - reduces the no-load voltage on the electrode to a safe value. Ensures safety against electric shock when working in a humid environment.

Physical parameters

The device has a fan cooling system which significantly increases its efficiency.

The device is equipped with overload protection, which increases its reliability.

Power parameters

Three-phase power supply 3x400V

The appliance is not equipped with a power plug.

The device is equipped with a 36V socket enabling the connection of a reducer with a heater.

Equipment

The delivery includes a device with a professional 3-meter MIG 36 welding torch, a 3-meter ground cable, a 3-meter electrode cable, feeder rollers 0.8-1.0 and 1.0-1.2 for steel and 1.0-1.2 for aluminum.

Rated supply voltage - 3x400V; 50Hz (3ph)

Power - 11.5kW

No-load voltage - 78V

Maximum current - 300A MIG/TIG // 250A MMA

Current at 100% operation - 232A MIG/TIG // 195A MMA

Current at 60% operation - 300A MIG/TIG // 250A MMA

Aluminum wire diameter - 1.0 - 1.2mm

Brazing wire diameter - 0.8 - 1.2mm

Self-shielding wire diameter - 0.8 - 1.2mm

Steel wire diameter - 0.8 - 1.2mm

Stainless steel wire diameter - 0.8 - 1.2mm

Welding electrode diameter - 1.6 - 4.0mm

Welding current adjustment range - 30 - 300 A MIG/MAG // 10 - 300 A TIG // 10 - 250 A MMA

Wire Spool Size - 15kg / 5kg

Degree of protection - IP21S

Weight of device/set - 54/60kg

Overall dimensions length x width x height - 930x480x710mm

Device packaging dimensions L x W x H - 690x300x630mm

Trolley packaging dimensions L x W x H - 665x440x240mm