Welcome!
Industar e-shop
All prices include VAT *
EWM Taurus XQ 350 Synergic C G HP R1 5m MIG/MAG welding machine (semi-automatic)
EWM Taurus XQ 350 Synergic C G has the innovative Synergic programs rootArc® XQ, forceArc® XQ
MIG/MAG inverter welding machine with integrated wire feeder
Perfect MIG/MAG welds even with long welding wires
Synergistic control with one button operation.
There is no need to buy additional programs - all features of this type of machine are included in the delivery package from the factory
Taurus XQ 350 Synergic C G includes synergic programs for GMAW standard welding for steel/CrNi/Aluminum welding.
Synergy programs for powder wire welding.
Non-synergic operation for manual setting of welding parameters.
Also suitable for MMA welding, TIG welding and cutting.
Individually configurable programs for WORKS (welding tasks)
Powerful, high-precision EWM eFeed 4-roll welding wire feeder for safe and even feeding of welding wire.
Adjustable start and end crater functions.
Infinitely adjustable arc dynamics (throttle effect)
Your benefits
FlexFit Body System: Many accessory parts and options can be attached to the welding machine using conventional knurled nuts
LED information bar: Indicates the current operating status
Energy saving thanks to high efficiency and standby function.
Best suited for use with long hose packages.
Connection option for remote control.
Simple change of welding polarity without tools.
Insulated wire room.
IP23 protected against water spray.
Additional network connectivity with ewm Xnet software via integrated or external gateway.
PC interface for PC300 XQ software.
Free WPQR package for certification up to and including EXC2 according to EN 1090 and for welding non-alloy steels up to and including S355
Control panel features:
LP-XQ control: direct access to all important setting options.
Quick change between innovative welding processes.
"Favorite" button for quick access to a selection of frequently used jobs.
Favorite buttons:
Selected parameters can be easily saved by holding down the desired favorite button.
Programs are then easier to access instantly by pressing the relevant favorite button again.
Arc length correction.
Adjustment of arc dynamics (throttle effect) from a soft welding arc transition to a hard one.
Locking the control unit, e.g. transport, at the push of a button
Kilowatt display for calculating energy per unit of length
Effective arc power for calculating energy per unit length
The set includes a welding torch 5m, ground clamp, gas hose, power cord.
Technical information:
Setting range for welding current 5 A - 350 A
Duty cycle 40 °C 350 A / 80 %
320A / 100%
Open circuit voltage 82V
Mains voltage (from the factory) 3 x 380 V - 400 V
Mains voltage (possible) 3 x 440 V - 460 V
Mains voltage (possible) 3 x 480 V - 500 V
Network tolerances (from factory) -25% to +20%
Mains frequency 50 Hz / 60 Hz
Recommended generator capacity 18.8 kVA
Efficiency 90%
Power consumption Pi 32 W
Wire feed speed 0.5 m/min - 25 m/min
19.685 ipm - 984.253 ipm
Factory installed roll equipment 1.0-1.2 mm UNI / Steel
Coil diameter D200/D300
Torch connection Euro torch connector
Protection class IP23
Test mark
EMC class A
Dimensions (W x D x H) 1150 mm x 678 mm x 972 mm
45.3 x 26.7 x 38.3 inches
Weight 113.4 kg / 250 lbs
Standards IEC 60974-1, -5 and -10 CL.A
EWM_Taurus_XQ_350_Synergic_manual.pdf
EWM_Taurus_XQ_350_Synergic_panel_control.pdf
Cart
Cart is empty.