EWM Picomig 220 puls TKG MIG/MAG welding machine (semi-automatic)

EWM Picomig 220 puls TKG is a unique and multi-process MIG/MAG pulse welding machine, compact, portable, Euro torch connector, with PFC module, designed for 5 kg D200 coils.

High efficiency current consumption thanks to integrated PFC (Power Factor Correction) technology.

Welding procedures and functions

GMAW pulse welding and GMAW standard welding

Significantly less splashing and therefore less post-processing work thanks to the pulse function.

GMAW pulse welding of aluminum and aluminum alloys,

Steel, CrNi, CuSi, aluminum and powder wire applications.

MMA welding and TIG lift arc welding.

Perfect for using self-shielding wires for welding.

Infinitely adjustable arc dynamics (throttle effect)

Non-fixed/fixed operation

Interval welding

Adjustable gas pre- and post-flow time,

Portable, compact! And there is Pulse!

There is no need to purchase additional programs - all features of this type of machine are included in the delivery package from the factory.

Rugged housing suitable for construction site use

High open circuit voltage for excellent ignition characteristics

4 roll drive

Energy saving thanks to high efficiency and standby function.

Simple change of welding polarity without tools.

Insulated wire room.

3.5 m power cord with 16 A shockproof plug.

Free WPQR package for certification up to and including EXC2 according to EN 1090 and for welding non-alloy steels up to and including S355.

Overvoltage protection: accidentally connected to 400 V mains voltage, the device will not be damaged!

Setting of all welding parameters and functions - simple setting of the operating point, pre-programmed JOBs (welding tasks) can be selected from the JOB list

GMAW pulse welding and GMAW standard welding. The welder can choose how to adjust the equipment and its parameters.

Significantly less splashing and therefore less post-processing work thanks to the pulse function.

What can be welding aluminum without a pulse? No one! The EWM Picomig 220 pulse TKG comes with a carefully designed pulse welding mode - pulse welding of GMAW aluminum and aluminum alloys.

Steel, CrNi, CuSi, aluminum and powder wire applications.

MMA welding and TIG lift arc welding selection on the control panel

Perfect for welding self-shielding wires and easy to set up.

Infinitely adjustable arc dynamics (throttle effect)

Non-fixed/fixed operation

Interval welding

Gas pre- and post-flow time can be adjusted easily on the control panel

The set comes with a ground cable and a 4 m welding MIG/MAG torch

Version Picomig 220 puls TKG

Setting range for welding current 5 A - 220 A

Duty cycle 40 °C 220 A / 30 %

170A / 60%

150A / 100%

Open circuit voltage 70 V

Mains voltage (from the factory) 1 x 230 V

Network tolerances (from factory) -40% to +15%

Mains frequency 50 Hz / 60 Hz

Recommended generator capacity 8.8 kVA

Efficiency 86%

Power consumption Pi 15 W

Wire feed speed 1 m/min - 18 m/min

39.37 ipm - 708.662 ipm

Factory installed roll unit 0.8 + 1.0 mm / Steel

Coil diameter D200

Torch connection Euro torch connector

Protection class IP23

Test mark

EMC class A

Dimensions (W x D x H) 559mm x 276mm x 340mm

22" x 10.9" x 13.4".

Weight 18 kg / 39.7 lbs

Standards IEC 60974-1, -5 and -10 CL.A