EWM Phoenix XQ 400 puls CW HP MIG/MAG welding machine (semi-automatic)

€11,530.00

Add to cart

EWM Phoenix XQ 400 puls MIG/MAG inverter welding machine, pulsed, with integrated wire feeder

Perfect MIG/MAG welds even with long welding wires

Synergistic control with one button operation

There is no need to purchase additional features - all features of this type of machine are included in the delivery package from the factory

With innovative EWM Synergic properties rootArc® XQ/rootArc® puls XQ, forceArc® XQ/forceArc® puls XQ, pulse/superPuls and Positionweld for aluminum

Synergic characteristics for MIG/MAG standard or impulse welding of steel/CrNi/Aluminium

Synergistic characteristics of wires with a fusible core

Non-synergic operation for manual setting of welding parameters

Also suitable for MMA welding, TIG welding and cutting

Individually configurable programs for WORKS (welding tasks)

Powerful, high-precision EWM eFeed 4-roll wire feeder for safe feeding of all hard and fusible cores

Adjustable start and end crater functions

Infinitely adjustable arc dynamics (throttle effect)

Your benefits

flexFit body system: Many accessory parts and options can be attached to the welding machine using conventional knurled nuts

LED information bar: Indicates the current operating status

Energy saving thanks to high efficiency and standby function

Best suited for use with long hose packages

Connection option for remote control and function pocket

Simple change of welding polarity without tools

Insulated wire room

IP23 protected against water spray

Additional network connectivity with ewm Xnet software via integrated or external gateway

PC interface for PC300 XQ software

The high cooling power of 1500 W, the high performance centrifugal pump and the 8 liter coolant tank ensure excellent cooling of the burner, resulting in cost savings on consumables.

Free WPQR package for certification up to and including EXC2 according to EN 1090 and for welding non-alloy steels up to and including S355.

The set includes a welding torch 5m, ground clamp, gas hose, power cord.

Technical information

Version Phoenix XQ 400 pulse C W HP R1 5m 19P

Setting range for welding current 5 A - 400 A

Duty cycle 40 °C 400 A / 60 %

350 A / 80 %

320 A / 100 %

Open circuit voltage 82V

Mains voltage (from the factory) 3 x 380 V - 400 V

Mains voltage (possible) 3 x 440 V - 460 V

Mains voltage (possible) 3 x 480 V - 500 V

Network tolerances (from factory) -25% to +20%

Mains frequency 50 Hz / 60 Hz

Recommended generator capacity 23.2 kVA

Efficiency 90%

Power consumption Pi 32 W

Wire feed speed 0.5 m/min - 25 m/min

19.685 ipm - 984.253 ipm

Factory installed roll unit 1.0-1.2 mm UNI / Steel

Coil diameter D200/D300

Torch connection Euro torch connector

Cooling capacity at 1 l/min. 1500W

Pump pressure 3.5 bar

Tank volume 8 l

Protection class IP23

Test mark

EMC class A

Dimensions (W x D x H) 1150 mm x 678 mm x 972 mm

45.3 x 26.7 x 38.3 inches

Weight 128 kg / 282.2 lbs

Standards IEC 60974-1, -2, -5 and -10 CL.A

EWM_Phoenix_MIG-MAG_XQ_Family.pdf

EWM_Phoenix_XQ_400_puls_CW_HP_Datasheet.pdf

EWM_Phoenix_XQ_400_puls_C_manual.pdf

EWM_Phoenix_XQ_400_puls_CW_HP_Operating_instructions_panel.pdf

Welcome!
Industar e-shop
All prices include VAT *

Cart

Welcome!Industar e-shopAll prices include VAT *

EWM Phoenix XQ 400 puls CW HP MIG/MAG welding machine (semi-automatic)

Welcome!
Industar e-shop
All prices include VAT *