VOREL Torque Wrench, 1/2" 28-210 Nm

It is mainly used in automotive technology for precise locking and where the manufacturer has specified the required tightening torque.

How to use:
- Select the appropriate scale Nm or lbs.
- Unscrew the locking screw at the selection end of the micrometer.
- Set the micrometer dial so that the scale is "0" equal to the vertical line of the key holder.
- Turn the micrometer wheel clockwise until the desired torque is set. The desired torque is set when the micrometer scale step overlaps the vertical line on the key. Then tighten the locking screw completely and set the correct direction of rotation of the ratchet, after which the key is ready for use.
- Insert the appropriate cover on the key pin. The torque set during tightening is indicated by a button click. If you hear or feel clicks, stop shrinking.

Comparison of moments in different units of length and strength:
1 kg*cm = 13.887 Oz*In (ounce*inch)
1 kg*cm = 0.867 Lb*In (funts*inch)
1 kg*m = 9.80665 N*m (Newtons*meters)
1 kg*m = 7.233 Lb*ft (funts*futs)
1 ft*Lb = 12 Lb*In (funts*inch)
1 dm*N = 14.16 Oz*In (ounce*inch)

Technical Information:
Size ...........................: 1/2"
Torque: 28-210 Nm
Length .......................: 465 mm
Weight .............................: 1.7 kg

*Check availability before placing an order.