Sveiki! „Industar“ elektroninė parduotuvė Visos kainos nurodytos su PVM *
Sherman DIGIMIG 200X Synergic
The synergistic welding machine DIGIMIG 2OOX SYNERGIC is the most modern welding device on the Polish market, intended for welding materials such as: carbon steels, alloy steels ( stainless, acid-resistant ), as well as aluminum alloys .
The welder enables welding with the following methods:
MMA
MIG / MAG
TIG Lift
The device is used for manual welding of steel and non-ferrous metals. The MIG / MAG method can be used in manual and synergic mode , simplifying its operation and allowing the welding machine to be used by people with less experience and hobbyists.
Thanks to the IGBT transistors used, the device has an efficiency of 45% and is characterized by low weight and failure-free operation, as well as for a significant reduction in weight and dimensions of the welder and an increase in efficiency while reducing energy consumption.
TECHNICAL DATA:
- Supply voltage: AC 230V 50Hz
- Maximum power consumption: 6.6 kVA
- Rated welding current: / MIG duty cycle: 200A / 45%; MMA: 180A / 60%; TIG: 200A / 60%
- Rated voltage in no-load condition: 65V (9V with VRD)
- Wire spool diameters: 100mm, 200mm
- Maximum current consumption: MIG: 33 A; MMA: 33 A; TIG: 24 A.
- Weight: 13 kg
- Dimensions [mm]: 480 x 210 x 330
- Protection degree: IP21
RANGE OF PARAMETER ADJUSTMENTS:
- Welding current: MIG: 30 - 200 A; MMA: 20 - 180 A; TIG: 10 - 200 A.
- Welding voltage: MIG: 17.5 - 24.7 V
- Wire feed speed: 2 - 15 m / min
- Inductance: -10 - + 10%
- Burnback time: 0 - 10 s
- Welding voltage correction: -5 - +5 V
Krepšelis
Krepšelis tuščias.